Vibration body and base of the machine are welded frame, selected profiles and steel plates are high quality structural steel, good weldability, strong impact resistance, excellent crack resistance. The material of grid plate is 16Mn steel plate. All welds are continuous welds (with single groove and fillet welds), and the welds are required to be smooth and uniform. Flux cored wire and CO2 gas shielded welding are used to increase the service life of the machine. After welding, aging treatment and two annealing stress relief treatment are adopted.
The spring material is 60Si2Mn, and the hardness of heat treatment is HRC44-58. The surface is oxidized and strengthened by shot peening. The two ends are tightly ground, and the orientation is guided by the guide cone of the inner hole of the spring. The roughness of contact surface between vibrating body and resonance spring is 12.5.
Structural features:
This machine is mainly composed of vibrating body, base, resonance spring and electrical control cabinet, etc. It is a single body sand falling machine. Vibration body and base are welded structural parts, simple structure and reasonable design, reliable performance, adjustable vibration force, can be used in single machine, also can be used in parallel. Easy to start, stop quickly and smoothly, vibration motor overload protection automatically, with high efficiency, energy saving, low noise characteristics. The overall stiffness and local stiffness match, strong impact resistance, long service life, stable vibration, and low requirements on the foundation.
Working principle:
Vibration on the motor installed in bilateral symmetry, two vibration motor adopts synchronous starting and braking, two groups of vibration motor reverse synchronous vibration, the level of resultant force is zero, the vertical component of the same direction, with vertical grid bed, vibration on the body casting has been thrown up, down, repeatedly and grid bed collision, so that the sand mould and casting, sand separation. The motor balance block is adjustable, so that the shock force can meet the needs of production.
Main performance features:
motor excitation force is adjustable. Change the included Angle of the eccentric block at both ends of the motor to adjust the excitation force.
vibration motor is installed using patented self-locking nut and high strength bolt to clamp and prevent loose, allowing the motor to be firmly connected to the vibration body.
electrical control Vibration motor uses energy consumption brake form, overload protection, short circuit phase loss protection. The function of energy braking is to stop the machine quickly after the power failure, thus avoiding the resonance zone and eliminating the unstable state.
to prevent the scattering of sand and facilitate cleaning, a frame is arranged around the grid plane to prevent the vibration of sand block spillover, with a height of 150mm.
establish the field operating cabinet.
Manufacturing standard: JB/T6575-93 "Technical conditions of sand falling machine"
){kind=link}