Customization: | Available |
---|---|
After-sales Service: | 1 |
Warranty: | 1 |
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
I. main purposes
It is suitable for screening bulk materials in metallurgy, mining, chemical, building materials and foundry workshops.
Ii. Main technical parameters
The serial number is called the gauge
Productivity: 30-40 tons/hour
Size of sieve hole 6 x 16mm
3 Φ 1000 / Φ sieve body size 1000 x 2200
4 sieve speed: 26r/min
5 speed reducer model zsy160-25-i
6 drive motor model y132m-6
Drive motor power: 4kW
Iii. Main features
1. Smooth operation, reliable operation and fine screening.
2. Principle of efficient screening: feed with hexagonal large end, and the screen area is equal to increase by 30-40%.Material from the high point of the screen cylinder, to achieve crushing and fine screening, and mesh less adhesive.The long mesh size of 6x16mm was selected to screen out the hard particles larger than 4-5mm in the old sand, which made the sand quality uniform and the casting yield high.(old-fashioned screen material sliding down from the middle of the screen cylinder into an inefficient screen form).
3. The 6x16mm long hole net is cold-drawn stainless steel high-strength thick wire braid, with a lifespan of more than two years, especially suitable
S4310 fine hexagonal sieve operation manual S4310---SM
Page 3 of 5
Old sand sieving suitable for foundry.
4. The outer hexagonal of the mesh is pulled and fixed with each other, so that the mesh surface is tight and not easily broken, and has a good rebounding and crushing effect, and is easy to replace.
5. The offset feed inlet is smooth and free of spindle and sleeve resistance.The elevation is only 100-200mm higher than the feeding type of hexagonal small end.
6. Strong ventilation is available to control mud content and achieve certain cooling effect.At the same time reduce moisture, heat, adhesion to the hole of the dew and adhesion.And improve the aging life of synthetic rubber screen.