| Customization: | Available |
|---|---|
| Control Type: | PLC |
| Customized: | Non-Customized |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
The machine is simple in structure, reliable in use and convenient in maintenance.It is mainly composed of shell, transmission device, loose grinding wheel, suspension chain, spring supporting plate and so on.
When the machine is disassembled and disassembled, open the side cover and loosen the screw of bearing seat, then the loose grinding wheel can be taken out from the side for welding repair of loose grinding wheel.There is no need for lifting equipment, and no need for big disassembly and big unloading.Blade teeth on the main part loose grinding wheel are herringbone interlock welded on the disk. This arrangement makes the ejected sand concentrate in the middle part of the conveyor to prevent the inner side wall from sticking to the sand.The surface of blade teeth is welded with tungsten-carbide, which greatly extends the service life.The elastic supporting plate can prevent the iron flying edge caused by loose grinding wheel from cutting the tape.An observation door is provided on the left and right to observe the working status of loose grinding wheel.
Loose wheel 2, 4 in the same direction and speed of high-speed rotation, loose sand grinding wheel 2 blade tooth will regiment broke and along the tangent direction into the grinding wheel 4, loose wheel and 4 to 15% higher than loose wheel 2 speed will loose again to sand group, when the loose sand was loose wheel 4 along the tangent direction, sand with hanging chain collision, hit after sand land on belt conveyor was sent away.
In addition to sand loose caused by the ejection and collision of loose grinding wheel, it can be seen from FIG. 2 that every blade tooth of loose grinding wheel cuts several sand masses. At this point, high-speed rotating blade teeth can cut and break the hard sand masses in sand.
){kind=link}