S8660 vibration boiling cooler quantity: 1
4.5.1, use the machine
Cooling of the machine is suitable for foundry sand, sand through temperature measurement, humidifying device control moderate moisture content, and through the form a complete set of drum wind, the wind and dust removal system, lower sand silt content. This machine is widely used in foundry sand treating section.
4.5.2, structure features
Machine fixed on the cover and vibration bed two parts, with a rubber sheet flexible connection between them, and keep the seal, vibration bed bed surface orifice plate, stainless steel boiling both sides of the bed is equipped with two vibration motor, synchronous reverse rotation, fixed on the cover at the top of the lot, bed bottom (feed) with the tuyere. When the machine work, by ACTS on the fuselage vibration motor, linear vibration of the material on the orifice inclined forward, at the same time the lower drum wind through the orifice plate, and the bed, make the bed is fluidized state of suspension, in the process of the campaign, the drum into the cold air in the hot sand of the heat transfer at the same time, prompted ash content of sand, make the sand silt content reduced. (when no such need to suck the dust with yarn by cyclone catcher recycled).
In order to improve the cooling effect, S8660 vibration touch boiling cooling machine is fixed on the cover material baffle can through its displacement signal with or without material, input of PLC, as a condition of the restriction of humidification; In the enclosure is apart from the 300 mm pipe is equipped with tungsten carbide wear-resisting head platinum temperature measuring probe, keep the temperature signal input PLC temperature models for data processing, automatic control water quantity.
The machine must form a complete set of induced draft fan and blower, it is recommended to use 4-72-6 - c fan for lead wind, (air volume of 30000 m3 / h)
The machine adopts four groups of composite spring damping, the work is smooth and downtime.
){kind=link}